Borosilicate glass material overview

Internal Defects and Material Homogeneity in Molten-Formed Borosilicate Glass

An inclusion in a visible optical zone can distort the beam or stand out against a backlight. The same feature in a concealed region may have a different consequence. An internal-quality specification should identify the feature, its location, its optical effect and the conditions under which it will be judged.

Identify Bubbles, Striae and Solid Inclusions

Observed featureWhat to investigate
Bubble or seedRecord its apparent size, shape, position and distribution. A seed is a small gas inclusion. Bubble populations can reflect the state of the melt, gas entrainment or local process conditions.
Stria or cordLook for a band or streak that changes visibility with the viewing direction. Refractive-index variation can result from local compositional variation or incomplete mixing.
Stone or crystalline inclusionRecord the apparent particle and any surrounding distortion or crack. Undissolved batch, refractory particles and local crystallization are possible origins.

Record the feature before assigning its cause. Light passing through a curved wall can magnify or obscure a feature. Rotate the part and examine it in reflected and transmitted light to distinguish a surface mark from a feature within the glass. SCHOTT optical glass catalogue, internal quality chapter

Enlarged schematic examples of a gas bubble, a refractive-index stria and a solid inclusion inside a glass section.
Diagram. Examples of internal features viewed in or through glass. Compare the feature from several angles before classifying it.

Relate Defect Distribution to Process History

Refining assists gas removal from the melt. Homogenization reduces local variation across the melt. Forming can stretch a region of compositional variation into a streak. If a feature appears across multiple moulds or tools, compare the affected pieces by melt lot and production time. If the feature repeats at the same position on one tool, examine the local flow, surface and tooling as well. Preserve samples and trace records so the proposed cause can be tested. BO-Glass melt preparation guide · BO-Glass defect troubleshooting guide

Set Inspection Zones and Viewing Conditions

Mark the clear aperture, display face, concealed skirt and any structural interface on the drawing. Agree acceptable feature size, counting threshold, quantity, spacing or clustering for each relevant zone. Specify the lighting, background, orientation, viewing distance and magnification. A borderline reference sample can help inspectors reproduce the visual decision. For a precision optical function, discuss shadowgraph or wavefront testing where appropriate. Define the optical path and orientation so results can be repeated. SCHOTT TIE-25, Striae in optical glass

Inspection Priorities by Zone

Functional zonePay particular attention toReproduce the inspection by defining
Clear apertureStriae, bubbles in the light path and local image distortionAperture boundary, orientation and transmitted-light setup
Visible diffuser surfaceIsolated spots, feature clusters and uneven lit appearanceLight source, viewing distance and approved appearance samples
Concealed skirtFeature clusters near edges or adjacent to loading pointsThe boundary of the hidden area and the inspection conditions on each face
Loaded rim or seating landInclusions with nearby cracking and defects at the contact regionLoaded footprint, edge condition and the visual or magnified method
Glass cover cross-section with the optical aperture, visible skirt, concealed skirt and loaded rim highlighted.
Diagram. A molded cover can have separate inspection zones for optical performance, appearance and seating.

Verify the Functional Effect

For a diffuser, evaluate visible spots under the intended light source and check whether the part produces the agreed light distribution. For a clear cover, assess distortion with the proposed viewing angle and useful aperture. Use the optical measurement guide to define the light source, viewing geometry and endpoint. A solid inclusion near a loaded rim merits separate review of cracking and structural risk. Recheck the original acceptance zone after any corrective trial and review nearby characteristics that the process change could influence.

References and Data Scope

SCHOTT’s optical-glass methods provide examples of how to define and measure internal quality. Establish acceptance limits for the finished borosilicate component using its actual geometry, application and agreed inspection capability.