Custom Glass Lenses for Underwater Explosion-Proof Luminaires
BO-Glass developed a custom domed glass lens for a U.S. lighting manufacturer’s underwater luminaire project. The work focused on impact resistance, hydrostatic pressure performance and sealing-surface precision, with the glass designed for integration into the customer’s complete luminaire.

Three Requirements, One Glass Component
The customer needed a lens that could address mechanical impact and sustained underwater pressure while fitting the housing’s sealing interface. Each requirement affected the others: glass thickness and curvature influenced the lens structure, while the flange needed a precisely controlled surface for the gasket or O-ring.
7 J Impact Requirement
The lens had to withstand the specified impact test without visible cracking or chipping.
Underwater Pressure
The glass and its assembled sealing interface needed to maintain integrity under hydrostatic load.
0.01 mm Sealing Flatness
The bottom sealing surface required precision finishing beyond the as-pressed condition.
A 10 mm Domed Glass Design
The project used a 10 mm glass thickness and a curved dome profile. The geometry was selected to distribute loads across the lens rather than relying on thickness alone.
A broad flange provided the interface with the housing seal. Its shape and finished surface were treated as part of the structural and sealing design, alongside the dome itself.

From Custom Tooling to a Precision Sealing Surface
Custom tooling established the dome and flange geometry during hot forming. Controlling the formed profile provided the foundation for the subsequent strengthening and finishing work. The production images below show the forming equipment and heated glass at the press.



Thermal Strengthening
The project incorporated physical tempering to improve resistance to mechanical loading. Strengthening, component geometry and the sealing interface were considered together as part of the manufacturing plan.
Precision Sealing Finish
Precision grinding addressed the sealing-surface variation left by pressing. The project record specifies diamond grinding with coolant and flatness measurement to achieve the required 0.01 mm sealing surface.
Reported Project Results
According to the project record, the finished lenses met the impact and sealing requirements below. Sealing-surface flatness was also checked on each production piece.
| Check | Project Value | Reported Result |
|---|---|---|
| Impact | 7 J | No visible cracks or chips after testing. |
| Hydrostatic Pressure | 1.5 MPa for 24 hours | No leakage in the tested assembly. |
| Sealing-Surface Flatness | 0.01 mm | Verified by production inspection. |
These results apply to the tested glass and assembly. Final luminaire qualification depends on the complete design and the specified tests.
Glass Engineered for the Complete Assembly
This project brought together dome geometry, glass thickness, thermal strengthening and a precision sealing surface. The resulting component addressed the customer’s defined impact, pressure and fit requirements within one glass design.
The assembled luminaire illustrates the intended application of the lens. BO-Glass’s contribution in this case was the custom glass component.

Contact Us
Discuss Your Custom Glass Project
Share your drawing, photos or dimensions, together with the intended use and target quantity. We will review your requirements and discuss the next steps.
Sales Enquiries
Email sales@bo-glass.com with your part description, intended use and target quantity.
Send Your Design
Use the form to upload a drawing or describe an existing part. Mark critical dimensions and tell us which surfaces or features matter most.
Request a Custom Glass Quote
Upload a drawing or share dimensions, quantity, intended use and finish. Include any heat, pressure or chemical exposure.
Your drawings remain confidential.
We use the contact details you provide to respond to your enquiry. See our Privacy Policy for more information.
