Glass Screen-Printing Plate Clogging
What Causes Screen-Printing Plate Clogging?
The reasons for the plate smearing during screen printing are complicated, and the main reasons are as follows.
(2) Reasons for workshop temperature, humidity, and ink properties: The screen printing workshop requires a temperature of about 20°C and low relative humidity. The volatile solvent in the ink will evaporate quickly, and the viscosity of the sleeve on the screen will be separated, thereby blocking the mesh. Another point that should be noted is that the plate-smearing phenomenon will occur if the downtime is too long. The longer the time, the more serious the plate smearing. If the ambient temperature is low and the ink has poor fluidity, it can easily cause plate smear.
(3) Reasons for the screen printing plate: It can be used only after it is rinsed with water and dried before use. If it is left for too long after it is made and is not printed in time, dust will adhere to it more or less during storage. If it is not washed during printing, it will cause the plate to smear.
(4) Reasons for printing pressure: If the printing pressure is too enormous during the printing process, the scraper will bend. The scraper will not be in line contact with the screen printing plate and the glass but in surface contact. In this way, the ink cannot be scraped cleanly each time, and residual ink will be left. After a certain period, it will form a film and cause the plate to be blocked.
(5) Reasons for the improper gap between the screen printing plate and the glass: The gap between the screen printing plate and the glass cannot be too small. If the gap is too small, the screen printing plate cannot be separated from the glass after cutting and printing. When the screen printing plate is picked up, a certain amount of ink will stick to the bottom of the printing plate, which is also easy to cause the plate to be blocked.
(6) Reasons for ink: When the particles of pigments and other solid materials in the screen printing ink are significant, it is easy to block the mesh.
In addition, the mesh size and through-hole area of the selected screen are smaller than the particle size of the ink, making it difficult for the coarser particles of ink to pass through the mesh and cause the screen to be blocked. This is also one of the reasons. The blockage caused by the large particles of ink can be solved from the time of manufacturing the ink. The primary method is to control the fineness of the ink strictly.


How to Address Screen-Printing Plate Clogging
The oil base’s poor fluidity will also cause it to stick to the plate before it passes through the screen. To solve this problem, the fluidity of the ink can be improved by reducing the ink’s viscosity without affecting the printing quality.
If a plate sticking failure occurs, a suitable solvent should be selected for scrubbing according to the properties of the ink on the plate. When scrubbing, start from the middle of the printing surface and wipe gently outward. After brushing, the printing plate should be checked. If there is a defect, it should be repaired in time, and printing can be restarted after repair. It should be noted that each scrubbing will make the plate film thinner. If the plate film is seriously damaged during wiping, a new printing plate needs to be replaced for printing.
Contact Us
Discuss Your Custom Glass Project
Share your drawing, photos or dimensions, together with the intended use and target quantity. We will review your requirements and discuss the next steps.
Sales Enquiries
Email sales@bo-glass.com with your part description, intended use and target quantity.
Send Your Design
Use the form to upload a drawing or describe an existing part. Mark critical dimensions and tell us which surfaces or features matter most.
Request a Custom Glass Quote
Upload a drawing or share dimensions, quantity, intended use and finish. Include any heat, pressure or chemical exposure.
Your drawings remain confidential.
We use the contact details you provide to respond to your enquiry. See our Privacy Policy for more information.
